Fieldpiece SDMN6 – Dual Port Manometer w/ Pressure Switch Tester
$235.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Fieldpiece SDMN6 - Dual Port Manometer w/ Pressure Switch Tester Specs
| Operating environment | 32°F to 118°F (0°C to 48°C) at <80% RH |
| Storage temperature | -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed) |
| Power | 9V, NEDA 1604A, IEC 6LR61 9V alkaline battery. |
| Battery life (alkaline) | 200 hours (manometer only, backlight off), 12 hours (pressure switch testing @ 27% pump speed, BL off, approx -2.5"WC induced pressure w/o pump bleed accessory) |
| Auto power off (APO) | 15 minutes |
| Low battery indication | symbol is displayed |
| Units of Measure | inWC, mmWC, mbar, psi |
| Resolution | 0.01 inWC |
| Overrange | "OL" or "-OL" is displayed |
| Max Pressure | 900inWC (17.4psi) will damage sensors |
| Compatible media | Dry, non-corrosive gases |
| Pressure ports | 2 connectors (P1, P2) for flexible tubing (4.5mm to 8mm ID) |
| Pump port | 1 connector (PUMP) for 5mm (~3/16 inch) ID flexible tubing |
| Lead jacks | 2 banana plug jacks for testing open/close switch status (continuity between terminals) |
| Accuracy | Stated accuracy at 0 to 50°C (32 to122°F): ±1.5% FS |
| Accuracy and ranges | inWC: ±0.02 on 0.00 to ±2.00 (±1.5% FS on 2.00 to ±60.0) mmWC: ±0.5 on 0.00 to ±51.0 (±1.5% FS on 51.0 to ±1500) mbar: ±0.05 on 0.00 to ±5.00 (±1.5% FS on 5.00 to ±150.0) psi: ±0.001 on 0.000 to ±0.07 (±1.5% FS on 0.07 to ±2.000) |
- SDMN6 - Dual Port Manometer and Pressure Switch Tester
- ANC1 - Four Pocket Carrying Case
- ASP2s - Static Pressure Probes
- RMA316 - Pressure Tubes
- Quick Connect Leads
- Hoses and Y-splitter
- Hoses with Brass Screw Fittings
Be the first to review “Fieldpiece SDMN6 – Dual Port Manometer w/ Pressure Switch Tester”
Reviews
There are no reviews yet.