TSI 8455-09 Air Velocity Transducer
$611.00
In Stock
The TSI 8455-09 industrial airflow validation transmitter ensures highly accurate industrial environment mapping by deploying a 9-inch telescopic hot-wire thermal sensor configuration. Built to handle sensitive micro-velocity profiling up to 50 m/s with an outstanding ±1% precision rating, it ports continuous real-time data logs cleanly over user-selectable 4-20mA, 0-5V, or 0-10V analog I/O connection networks seamlessly.
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
TSI 8455-09 Air Velocity Transducer Specs
| Accuracy | ±2.0% of reading, ±0.5% of full scale of selected range |
| Range | 25 to 10,000 fpm (0.127 to 50.8 m/s), selectable |
| Repeatability | <±1.0% of reading |
| Response to Flow | 0.2 sec |
| Compensation | 32 to 140°F (0 to 60°C) |
| Operating (electronics) | 32 to 200°F (0 to 93°C) |
| Operating (sensor) | 32 to 200°F (0 to 93°C) |
| Storage | 32 to 200°F (0 to 93°C) |
| Resolution (minimum) | 0.07% of selected full scale |
| Input Power | 11 to 30 VDC or 18 to 38 VAC, 350 mA max |
| Impedance Voltage mode | less than 1 ohm, 20 mA max source current |
| Resistance Current mode | 500 ohms maximum load |
| Signal | Field selectable 0 to 5V, 0 to 10V, 0 to 20, 2 to 10V, mA, 4 to 20 mA |
| Time Constant | Field selectable 0.05 to 10 seconds |
| Probe length | 9 inch |
- Probe attached to 16.4-ft (5-m) cable connected to control module
- Compression fittings for mounting in duct work
- Two holding clips to mount probe to parallel surface
- Operation and service manual
- NIST calibration certificate
- Two-year limited warranty
Be the first to review “TSI 8455-09 Air Velocity Transducer”
Related products
Reviews
There are no reviews yet.