Fluke P3116-MPA Oil Deadweight Tester Single PCU
$12,451.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Fluke P3116-MPA Oil Deadweight Tester Single PCU Specs
| Oil operated | Ranges to 20 000 psi (1 400 bar) |
| Distilled water operated | Ranges to 10 000 psi (700 bar) |
| Accuracy | ± 0.015 % of reading (± 0.008 % optional) Note: Accuracy based on % of reading from 10 % to 100 % of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) X 10 % of the piston range. |
| Standard weight material | Series 3 non-magnetic austenitic stainless steel Density: 7.8 g/cm 3 |
| Standard weight material | Series 3 non-magnetic austenitic stainless steel Density: 7.8 g/cm 3 |
| Optional fractional weights | Solution heat treated aluminum Density: 2.7 g/cm 3 |
| Piston material | Tungsten carbide with nickel binder Density: 15.0 g/cm 3 |
| Cylinder material | Hardened martensitic steel Tungsten carbide (water above 500 psi, 35 bar) |
| Thermal coefficients of expansion | Oil piston/cylinder 16.5 ppm/°C Water (above 500 psi, 35 bar) 11 ppm/°C |
| Test port adaptors | M14 X 1.5, M20 X 1.5, 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT and BSP |
| Weight | 16 kg (36 lb) |
| Dimensions (W x D x H) | 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) |
| Mass set weight (typical) | 36 kg (80 lb) |
| Reservoir volume | 150 cm 3 (9.2 in 3 ) |
| Screw press displacement | 5.5 cm 3 (0.34 in 3 ) |
| Pump displacement | 4.7 cm 3 (0.29 in 3 ) per stroke |
| O-ring seal materials | Buna N as standard, Viton and EPDM available |
| Up to 500 psi (35 bar) | 1 psi (0.1 bar) |
| 500 psi to 5 000 psi (35 bar to 350 bar) | 10 psi (1 bar) |
| 5 000 psi to 20 000 psi (350 bar to 1 400 bar) | 20 psi (2 bar) |
| Model P3112 | 1 psi (0.1 bar) |
| Up to 500 psi (35 bar) | 0.1 psi (0.01 bar) |
| 500 psi to 5 000 psi (35 bar to 350 bar) | 1 psi (0.1 bar) |
| 5 000 psi to 20 000 psi (350 bar to 1400 bar) | 2 psi (0.2 bar) |
- Deadweight Tester with weight set
- M14 x 1.5, M20 X 1.5, 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT and BSP female adaptors
- Spare seals
- ISO17025 Calibration Certificate with Data
- Operating fluid
Be the first to review “Fluke P3116-MPA Oil Deadweight Tester Single PCU”
Reviews
There are no reviews yet.