SurgeX SX1115RT Energy Management
$753.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
SurgeX SX1115RT Energy Management Specs
| Load Rating | 15 Amps @ 120 volts |
| Power Requirements (no load) | 15 watts |
| Surge Let-Through Voltage (6000-volt surge) | 0 volts |
| UL 1449 Adjunct Classification Test Results | 1000 surges, 6000 volts, 3000 amps, B3 pulse |
| Measured suppressed voltage | 170 volts, no failures |
| Federal Guidelines | Grade A, Class 1, Mode 1 (CID A-A-55818) |
| EMI/RFI Filter, Normal Mode (50-ohm load) | 40 dB @ 100 kHz; 50 dB @ 300 kHz; 50 dB @ 3 MHz; 50 dB @ 30 MHz |
| EMI/RFI Filter, Common Mode (50-ohm load) | 18 dB @ 300 kHz; 30 dB @ 1 MHz; 50 dB @ 5 MHz; 50 dB @ 20 MHz |
| Maximum Applied Surge Voltage | 6000 volts* |
| Maximum Applied Surge Current | Unlimited, due to current limiting* |
| Maximum Applied Surge Energy | Unlimited, due to current limiting* |
| Endurance (C62.41-1991 Category B3 pulses) | 1 kV>500,000; 3 kV>10,000; 6 kV>1000 |
| Undervoltage Shutdown | 90 volts (resume at 100 v) |
| Overvoltage Shutdown | 145 volts (resume at 135 v) |
| Maximum Load Inrush Current During Power-up | 1000 Joules |
| Remote Turn-on Applied Voltage Range | 5 to 30 volts DC |
| Contact Closure | 1.5 mA |
| 5 V DC Applied Voltage | 0.1 mA |
| 12 V DC Applied Voltage | 1.5 mA |
| 24 V DC Applied Voltage | 5.0 mA |
| Auxiliary Relay Contact Rating | 30 Volts at 1 Amp |
| LED Output | 12 volts DC, maximum 20 mA (resistor required) |
| Dimensions | 1.75" H x 19" W x 10.5" D (4.5 x 48.3 x 26.7 cm) |
| Weight | 11 lbs (5 kg) |
| Temperature Range | 5º to 35º C |
| Humidity Range | 5% to 95% R.H., non-condensing |
| Agency Listings | ETL and cETL certified to (UL 1449; CSA C22.2 No.8-M1986, R2000) |
Be the first to review “SurgeX SX1115RT Energy Management”
Reviews
There are no reviews yet.