Jenway 500731 – PFP7 Industrial Flame Photometer
$3,636.00
In Stock
Industrial elemental testing with the Jenway 500731 PFP7 flame photometer covers Na, K, Li, Ca, and Ba across a 0-199.9 range. It provides better-than-2% linearity, under 0.5% interference from equal concentrations of Na, K, and Li, 1% reproducibility, 90-250 V electrical service, compatible gas fuels, 420 x 360 x 300 mm dimensions, and 8 kg weight.
In Stock
Jenway 500731 - PFP7 Industrial Flame Photometer Specs
| Model | PFP7 (Industrial) |
| Ranges | 0-199.9 |
| Limits of Detection | Na ≤ 0.2ppm K ≤ 0.2ppm Li ≤ 0.25ppm Ca ≤ 15ppm Ba ≤ 30ppm |
| Reproducibility≤ | 1% Coefficient of Variation for 20 consecutive samples using 10ppm Na set to read 50 |
| Linearity | Better than 2% when concentration of 3ppm Na/K and 5ppm Li are set to read 100 |
| Specificity | Interference from Na/K and Li equal in concentration to test element will be <0.5% |
| Recorder Output | Nominal 1.00V for a reading of 100.0 |
| Services | Electrical: 90-125V or 190-250V @ 50/60Hz Air: moisture and oil free 6 litre/minute @ 1kg/cm 2 (14psi) Fuel: Propane, Butane, Natural Gas or L.P.G. |
| Size | 420 x 360 x 300mm |
| Weight | 8kg |
- 500731 PFP7 Industrial Flame Photometer
- Na+, K+, Li+, Ca+, and Ba+ filters
- 2 meters each of gas and air tubing, and necessary fittings.



Reviews
There are no reviews yet.