Memmert UF 750 TS – Pass Through Oven, 749L
$20,473.00
In Stock
An innovative dual-door configuration designed for partition wall synchronization dictates the operational framework of this hardware. The Memmert UF 750 TS specialized pass-through laboratory oven governs strict cleanroom bulk material transfers safely inside an expansive 749L stainless steel chamber layout. This high-capacity 4000 W industrial tool utilizes forced air convection loops up to +250 °C to prevent cross-contamination between different facility zones perfectly across continuous shifts.
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Memmert UF 750 TS - Pass Through Oven, 749L Specs
| Setting temperature range in °C | min. 10°C above ambient up to 250°C |
| resolution of display for actual values | 0.1°C |
| Temperature | 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
| ControlCOCKPIT | TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays. |
| Language setting | German, English, Spanish, French, Polish, Czech, Hungarian |
| Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function HeatBALANCE | adapting the distribution of the heating performance of the upper and lower heating circuit from -50 % to 50 % |
| Function SetpointWAIT | the process time does not start until the set temperature is reached |
| Calibration | three freely selectable temperature values |
| Fan | forced air circulation by quite air turbine, adjustable in 10 % steps for each segment individually |
| Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually |
| Vent | vent connection with restrictor flap |
| Documentation | programme stored in case of power failure |
| Programming | AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port |
| Temperature control | independently working, digitally adjustable electronic micro-processor overtemperature monitor TWW, protection class 3.1 (max-value for overtemperature, min-value for undertemperature) |
| Temperature control | mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| AutoSAFETY | additionally integrated over- and undertemperature protection “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature |
| Autodiagnostic system | for fault analysis |
| Alarm | visual and acoustic |
| Internals | 2 stainless steel grid(s), electropolished |
| Door | fully insulated stainless steel doors on two sides |
| Installation | with feet |
| Interior | easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
| Volume | 749 l |
| Dimensions W x H x D in mm | w(A) x h(B) x d(C): 1040 x 1200 x 600 mm |
| Max. number of internals | 14 |
| Max. loading of chamber | 300 kg |
| Max. loading per internal | 30 kg |
| Dimensions | w(D) x h(E) x d(F): 1224 x 1714 x 782 mm |
| Altitude of installation | max. 2,000 m above sea level |
| Ambient temperature | 5 °C to 40 °C |
| Humidity rh | max. 80 %, non-condensing |
| Overvoltage header | II |
| Pollution degree | 2 |
| Transport information | The appliances must be transported upright |
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Dimensions approx incl. carton | B x H x T: 1330 x 1920 x 1050 mm |
| Net weight | approx. 260 kg |
| Gross weight carton | approx. 331 kg |
Be the first to review “Memmert UF 750 TS – Pass Through Oven, 749L”
Reviews
There are no reviews yet.