PIE Model 334 4-20 Milliamp Loop Calibrator
$647.00
In Stock
In Stock
PIE Model 334 4-20 Milliamp Loop Calibrator Specs
| Operating Temperature Range | -20 to 60 C (-5 to 140 F) |
| Storage Temperature Range | -30 to 60 C (-22 to 140 F) |
| Relative Humidity Range | 10 % 10 % |
| Size | L=5.63 x W=3.00 x H=1.60 inches |
| Weight | 12.1 ounces (including boot & batteries) |
| Batteries | Four "AA" Alkaline 1.5V (Duracell MN1500 or equivalent) Optional 120 VAC 50/60 Hz AC adaptor available NiMh Rechargeable battery kit available |
| Miscellaneous | Low battery indication with nominal 1 hour of operation left Over-voltage protection to 135 vrms (rated for 30 seconds) or 240 vrms (rated for 15 seconds) High contrast graphic liquid crystal display with 0.413¡± (10.5 mm) high digits |
| Ranges and Resolution | 0.00 to 24.00 mA Full Span OR -25.0 to 125.0% of 4-20 mA |
| Accuracy EZ Check(s)at 4 & 20mA(1) | < ± 0.025% at 4.00mA and 20.00mA (± 0.005mA) |
| 0.0 to 24.00 mA | < ± 0.05% of 24.00mA (± 0.01mA) |
| Noise | < ± 0.005mA of Reading |
| Temperature effect | < ± 0.005 %/°C of FS |
| Loop compliance voltage | > 24 DCV @ 20.00mA |
| Loop drive capability | 1200 ω at 20 mA for 15 hours nominal |
| Battery life | Source and Power measure mode > 30 hrs at 12 mA nominal |
| Ranges | 0.00 to 52.00 mA Full Span OR -25.0 to 300.0% of 4-20 mA |
| Accuracy Below 24.01mA Above 24.00mA | < ± 0.05 % of 24.00mA (± 0.01mA) < ± 0.05 % of 52.00mA (± 0.02mA) |
| Voltage burden | < 2V at 50 mA |
| Overload/Current limit protection | 54 mA nominal |
| Battery life | Typical > 125 Hours nominal |
| Voltage burden | < 2V at 20 mA |
| Overload/Current limit protection | 24 mA nominal |
| Loop voltage limits | 2 to 100 VDC (fuse-less protected from reverse polarity connections) |
| Battery life | > 125 hours nominal |
| Range and Resolution | -99.99 to +99.99 VDC Full Span (FS) |
| Accuracy | < ± 0.05 % of FS |
| Temperature effect | < ± 100 ppm/°C of FS |
| Input resistance | > 2 Mω |
| Battery life | > 125 hours nominal |
| PIE 134 | Lowest cost unit. Source & read up to 24 mA. Current only |
| PIE 334 | Direct replacement for Altek 334A. Source up to 24 mA, read up to 52mA. Also reads up to 99.99 VDC Comes with rubber boot. |
| PIE 334Plus | Same functions as PIE 334 including patented current leak detection. Comes with rubber boot and 2 pocket hands free case. |
| PIE 434 | Higher accuracy version of the PIE 334Plus. Also some more options for step and ramp function. Comes with rubber boot and 2 pocket hands free case. |
| PIE 532 | High accuracy loop calibrator that sources and reads BOTH current and voltage(others only read voltage). Includes patented current leak detection and also loop diagnostics - ie.: the display of loop current, voltage and ohms. Comes with basic carrying case. |
- Rubber Boot
- (4) "AA" Alkaline Batteries
- Certificate of Calibration
- Test Leads with Alligator Clips







Reviews
There are no reviews yet.