Wagner Meters Orion 930 w/ NIST, Dual Depth Pinless Wood Moisture Meter with NIST-Certified Calibration Plate (good for 2 years)
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Wagner Meters Orion 930 w/ NIST, Dual Depth Pinless Wood Moisture Meter with NIST-Certified Calibration Plate (good for 2 years) Specs
| Length | 5.75 inches (146mm) |
| Width | 3.0 inches (76mm) |
| Thickness | 1.0 inches (25mm) |
| Weight with Boot | 7.2 oz. (204g) |
| Scanning Area | 2.0 inches (50mm) x 2.5 inches (63mm) |
| Power | 9-volt battery (Wagner recommends using non-rechargeable Alkaline or Lithium or rechargeable NiMH batteries) |
| Auto Power Shut-Down | 60 seconds |
| MC for wood | 4.0% to 32.0% (range will vary slightly depending on species setting) |
| Relative Measurement Scale | 0-100 |
| Specific Gravity Range for Wood Species | 0.20-1.0 SG |
| Storage Temperature and Humidity | +50˚F to +90˚F (+10˚C to +32˚C), Maximum relative humidity of 95%, Non-condensing |
| Operating Temperature Range | +32˚F to +110˚F (+0˚C to +43˚C) |
| Orion 910 | Orion 920 |
| Non-Damaging Pinless Sensor | ✔ |
| Virtually Unaffected by Temperature | ✔ |
| 7-Year Warranty | ✔ |
| Read Moisture Content from 5%-32% | ✔ |
| Press to Hold Readings | ✔ |
| Extended Range Species Settings | ✔ |
| Fast Selection Species Settings | ✔ |
| Programmable Alarm | ✔ |
| Rubber Boot and Hard Carrying Case | ✔ |
| IntelliSense™ Technology | ✔ |
| On-Site Calibration | ✔ |
| Relative Moisture Mode | ✔ |
| Deep Depth Measurement Mode | ✔ |
| Shallow Depth Measurement Mode | ✔ |
| Dual Depth Measurements | ✔ |
| Data Collection and Storage | ✔ |
| Bluetooth® App Enabled | ✔ |
| Temperature and Humidity Sensor | ✔ |
| EMC / GPPK Calculations | ✔ |
| Dew Point Calculations | ✔ |
- NIST-Certified Calibration Plate (good for 2 years)
- Orion 930 Dual Depth Pinless Wood Moisture Meter
- Rubber Protective Boot
- Foam-lined ABS Plastic Carrying Case
- 9V Battery
Be the first to review “Wagner Meters Orion 930 w/ NIST, Dual Depth Pinless Wood Moisture Meter with NIST-Certified Calibration Plate (good for 2 years)”
Reviews
There are no reviews yet.