AFL FS200-100-PRO-P1-W1 – FS200 OTDR Pro Kit, 1310/1550nm, with OLS/OPM and WiFi/Bluetooth
$4,815.00
In Stock
Strict FTTx link provisioning and high-capacity fiber-to-the-home trunk validation routines reach optimal diagnostic efficiency when utilizing the flagship AFL FS200-100-PRO-P1-W1 dual-wavelength pro certifier kit. This comprehensive analyzer provides full 1310/1550nm trace testing, a functional power meter, an optical light source, an advanced visual fault locator, and a top-tier video inspection probe tool. It enables local network administrators to isolate connector contaminants and faceplate scratches instantly, printing cloud-synced pass/fail audit trail certificates cleanly.
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
AFL FS200-100-PRO-P1-W1 - FS200 OTDR Pro Kit, 1310/1550nm, with OLS/OPM and WiFi/Bluetooth Specs
| Model: FS200-# | -100 |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Fiber Type | Single-mode |
| Wavelengths (nm) | 1310/1550 |
| Center λ Tolerance | ±20 nm (CW mode) |
| Dynamic Range (dB)c | 32/30 |
| Event Dead Zoned (m) | 0.8 |
| Atten. Dead Zonee (m) | 3.6 |
| PON Dead Zonef (m) | N/A |
| Pulse Widths | 3, 5, 10, 20, 30, 50, 100, 200, 300, 500 ns; 1, 2, 3, 10 µs; 20 µs (FS200-60/300/304 only) |
| Range Settings | 250 m to 240 km |
| Data Points | Up to 300,000 (Expert mode .SOR file) |
| Data Spacing | 5 cm to 16 m |
| Group Index of Refraction | 1.3000 to 1.7000 |
| Distance Uncertainty (m) | ±(1 + 0.003% x distance + data point spacing) |
| Linearity (dB/dB) | ±0.05 |
| Trace File Format | Telcordia SR-4731 Issue 2 compatible .SOR |
| Trace File Storage Medium | 4 GB internal memory (>5000 traces typical); External USB memory stick |
| Data Transfer to PC | USB cable or Bluetooth® or WiFi (option) |
| Standard OTDR Modes | SmartAuto, Expert, Real Time |
| Display Modes | LinkMap Summary, LinkMap Events, Trace |
| FleXpress Fast Test | No |
| Real-time Refresh Rate | Up to 4 Hz |
| Live Fiber Protection | No OTDR damage with input power ≤ +15 dBm for wavelength(s) in range 1260 to 1675 nm |
| Live Fiber Detection | Reports live fiber with input signal ≥ -35 dBm for wavelength(s) in range 1260 to 1675 nm |
| Live PON Filter Isolation | >50 dB for wavelength(s) in range 1260 to 1600 nm |
| Live PON OTDR Test | 1650 nm using filtered detector |
| Emitter Type | Visible red laser, 650 ±20 nm |
| Safety Classb | Class II |
| Output Power (nominal) | 0.8 mW into single-mode fiber |
| Modes | CW, 2 Hz flashing |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Fiber Type | Single-mode |
| Wavelengths (nm) | 1310/1550 |
| Center λ Tolerance | ±20 nm (CW mode) |
| Spectral Width (FWHM) | 5 nm (maximum) |
| Internal Modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID |
| Wave ID | Compatible with AFL OPM/OLS |
| Output Power Stability | ≤ ±0.1 dB (15 minutes); ≤ ±0.15 dB (8 hours) |
| Output Power | -3 dBm ±1.5 dB |
| Calibrated Wavelengths | 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs, 1 mm diameter |
| Measurement Range | +23 to -50 dBm |
| Tone Detect Range | +3 to -35 dBm |
| Wavelength ID Range | +3 to -35 dBm |
| Accuracyh | ±0.25 dB |
| Resolution | 0.01 dB |
| Measurement Units | dB, dBm or Watts (nW, µW, mW) |
- FlexScan
- Wrist strap
- Soft carry case
- Quick Reference Guide
- TRM 2.0 Advanced Test Results Manager software
- One Click cleaner
- 150m fiber ring
- Focis Flex fiber optic connector inspection system
Be the first to review “AFL FS200-100-PRO-P1-W1 – FS200 OTDR Pro Kit, 1310/1550nm, with OLS/OPM and WiFi/Bluetooth”
Related products
Reviews
There are no reviews yet.