AFL FS300-325-BIPM-P1-W1 – FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth
$8,913.00
In Stock
Strict network audit compliance and advanced telecommunication multi-gigabit link trunk troubleshooting routines reach optimal diagnostic efficiency when utilizing the flagship AFL FS300-325-BIPM-P1-W1 quad OTDR BIPM kit. This comprehensive analyzer provides full quad-wavelength testing interfaces, an integrated optical light source, a functional power meter, an advanced visual fault locator, and an auxiliary wireless video inspection probe. It enables administrators to trace active fiber line footprints and connector core contamination fluidly over integrated Wi-Fi/Bluetooth connections.
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
AFL FS300-325-BIPM-P1-W1 - FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth Specs
| OTDR | MULTIMODE |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Fiber Type | Multimode; compatible with OM1-OM5 |
| Wavelengths | 850/1300 ±20 nm |
| Network Type | Point-to-point |
| Connector Type | User-specified APC or UPC ferrule with interchangeable UCI adapters |
| Dynamic Ranged | ≥29/29 dB @ 850/1300 nm |
| Event Dead Zonee | ≤0.8 m @ 850/1300 nm typical |
| Attenuation Dead Zonef | ≤3.0 m |
| PON Dead Zoneg | Not applicable |
| Pulse Widths | 3, 5, 10, 20, 30, 50, 100, 200, 300, 500 ns; 1 µs |
| Range Settings | 250 m to 30 km |
| Data Points | Up to 300,000 |
| Data Spacing | ≥5 cm to ≤16 m |
| Group Index of Refraction | 1.3000 to 1.7000 |
| Distance Uncertainty | ±(1 + 0.0025% x distance + data point spacing) m |
| Linearity | ±0.03 dB/dB |
| Loss Resolution | 0.001 dB |
| Reflectance Range | 850: -20 to -58 dB; 1300: -20 to -63 dB |
| Reflectance Resolution | 0.01 dB |
| Reflectance Accuracy | ±2 dB |
| ORL Range | 20 to 60 dB |
| ORL Resolution | 0.01 dB |
| ORL Accuracy | ±2 dB over range 30 to 55 dB; ±4 dB over range 20-30 dB and 55-60 dB |
| Trace File Format | .SOR, Telcordia SR-4731 Issue 2 |
| OTDR Results Storage | Internal or external USB memory |
| Internal Storage | Minimum 4 GB internal non-volatile memory (App SW + > 1000 traces) |
| Internal Launch Fiber | ≥30 m internal MM launch fiber |
| OTDR Modes | Supports SmartAuto, Expert, Real-Time for PON & point-to-point networks |
| Real-time Refresh Rate | 1 to 4 Hz |
| Live Fiber Protection | No OTDR damage when connected to live fiber delivering ≤ +10 dBm at wavelength(s) in range 825 to 1675 nm |
| Live Fiber Detection | Reports live fiber with input signal ≥ -35 dBm for wavelength(s) in range 825 to 1675 nm |
| Emitter Type | Laser, Class IIIa (FDA 21 CFR 1040.10 and 1040.11); Class 3R (IEC 60825-1:2014) |
| Wavelength | 635 nm ±10 nm |
| Output Power | 1.5 mW (~+2 dBm ±0.5 dB) into SMF-28 |
| Modes | CW and 1 Hz flashing |
| Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs PIN, 2 mm diameter |
| Measurement Range | +3 to -70 dBm (+3 to -65 dBm @ 850 nm) |
| Tone Auto-Detect | 270 Hz, 330 Hz, 1 kHz, 2 kHz |
| Tone Detect Range | +3 to -50 dBm @1300, 1310, 1550 nm; +3 to -40 dBm @850 nm; |
| Wave ID | Auto-synchronizes & measures 1, 2 or 3 wavelengths |
| Wave ID Range | +3 to -50 dBm @1300, 1310, 1550 nm; +3 to -40 dBm @850 nm |
| Multi-Fiber Channel ID | Detects and reports Multi-Fiber channel ID (MFI) |
| MFI Detect Range | +3 to -35 dBm @1550 nm |
| Accuracy | ±5% @ -10 dBm |
| Linearity | ±0.1 dB (-3 to -40 dBm); ±0.25 dB (-40 to -70 dBm) |
| Resolution | 0.01 dB |
| Measurement Units | Power in dBm, nW, µW, mW; Loss in dB |
| Wavelengths | 850/1300/1310/1550 nm |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Launch Condition | Controlled Launch at 850 nm (comparable to encircled flux on OM4 fiber) |
| Center λ (CW Mode) | ±20 nm |
| Spectral Width | 5 nm maximum (FWHM, CW Mode) |
| Internal Modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID |
| SM Output Stability | Short-term c : ±0.1 dB; Long-term d : ±0.05 dB |
| MM Output Stability | Short-term e : ±0.20 dB; Long-term f : ±0.15 dB |
| Output Power | 1310/1550 nm: -7 dBm ±1.5 dB (CW, G.652.C/D) 1300 nm: -7 dBm ±1.5 dB (CW, 50 µm MMF) 850 nm: 0 dBm ±1.5 dB (CW, 50 µm MMF) |
- Flex Scan
- AC charger
- Battery
- Carry strap
- SC/2.5 mm connector adapters
- TRM 3.0 Advanced Test Results Manager software
- Quick reference user guide
- Carry case
- 150m fiber ring
- One-Click cleaner
- Focis Flex fiber optic connector inspection system
- OFI-BIPM bend-insensitive optical fiber identifier with power meter
Be the first to review “AFL FS300-325-BIPM-P1-W1 – FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth”
Reviews
There are no reviews yet.