AFL FS300-325-BIPM-P1-W1 – FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth
$8,913.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
AFL FS300-325-BIPM-P1-W1 - FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth Specs
| OTDR | MULTIMODE |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Fiber Type | Multimode; compatible with OM1-OM5 |
| Wavelengths | 850/1300 ±20 nm |
| Network Type | Point-to-point |
| Connector Type | User-specified APC or UPC ferrule with interchangeable UCI adapters |
| Dynamic Ranged | ≥29/29 dB @ 850/1300 nm |
| Event Dead Zonee | ≤0.8 m @ 850/1300 nm typical |
| Attenuation Dead Zonef | ≤3.0 m |
| PON Dead Zoneg | Not applicable |
| Pulse Widths | 3, 5, 10, 20, 30, 50, 100, 200, 300, 500 ns; 1 µs |
| Range Settings | 250 m to 30 km |
| Data Points | Up to 300,000 |
| Data Spacing | ≥5 cm to ≤16 m |
| Group Index of Refraction | 1.3000 to 1.7000 |
| Distance Uncertainty | ±(1 + 0.0025% x distance + data point spacing) m |
| Linearity | ±0.03 dB/dB |
| Loss Resolution | 0.001 dB |
| Reflectance Range | 850: -20 to -58 dB; 1300: -20 to -63 dB |
| Reflectance Resolution | 0.01 dB |
| Reflectance Accuracy | ±2 dB |
| ORL Range | 20 to 60 dB |
| ORL Resolution | 0.01 dB |
| ORL Accuracy | ±2 dB over range 30 to 55 dB; ±4 dB over range 20-30 dB and 55-60 dB |
| Trace File Format | .SOR, Telcordia SR-4731 Issue 2 |
| OTDR Results Storage | Internal or external USB memory |
| Internal Storage | Minimum 4 GB internal non-volatile memory (App SW + > 1000 traces) |
| Internal Launch Fiber | ≥30 m internal MM launch fiber |
| OTDR Modes | Supports SmartAuto, Expert, Real-Time for PON & point-to-point networks |
| Real-time Refresh Rate | 1 to 4 Hz |
| Live Fiber Protection | No OTDR damage when connected to live fiber delivering ≤ +10 dBm at wavelength(s) in range 825 to 1675 nm |
| Live Fiber Detection | Reports live fiber with input signal ≥ -35 dBm for wavelength(s) in range 825 to 1675 nm |
| Emitter Type | Laser, Class IIIa (FDA 21 CFR 1040.10 and 1040.11); Class 3R (IEC 60825-1:2014) |
| Wavelength | 635 nm ±10 nm |
| Output Power | 1.5 mW (~+2 dBm ±0.5 dB) into SMF-28 |
| Modes | CW and 1 Hz flashing |
| Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550, 1625, 1650 nm |
| Detector Type | InGaAs PIN, 2 mm diameter |
| Measurement Range | +3 to -70 dBm (+3 to -65 dBm @ 850 nm) |
| Tone Auto-Detect | 270 Hz, 330 Hz, 1 kHz, 2 kHz |
| Tone Detect Range | +3 to -50 dBm @1300, 1310, 1550 nm; +3 to -40 dBm @850 nm; |
| Wave ID | Auto-synchronizes & measures 1, 2 or 3 wavelengths |
| Wave ID Range | +3 to -50 dBm @1300, 1310, 1550 nm; +3 to -40 dBm @850 nm |
| Multi-Fiber Channel ID | Detects and reports Multi-Fiber channel ID (MFI) |
| MFI Detect Range | +3 to -35 dBm @1550 nm |
| Accuracy | ±5% @ -10 dBm |
| Linearity | ±0.1 dB (-3 to -40 dBm); ±0.25 dB (-40 to -70 dBm) |
| Resolution | 0.01 dB |
| Measurement Units | Power in dBm, nW, µW, mW; Loss in dB |
| Wavelengths | 850/1300/1310/1550 nm |
| Emitter Type | Laser |
| Safety Classb | Class I |
| Launch Condition | Controlled Launch at 850 nm (comparable to encircled flux on OM4 fiber) |
| Center λ (CW Mode) | ±20 nm |
| Spectral Width | 5 nm maximum (FWHM, CW Mode) |
| Internal Modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW, Wave ID |
| SM Output Stability | Short-term c : ±0.1 dB; Long-term d : ±0.05 dB |
| MM Output Stability | Short-term e : ±0.20 dB; Long-term f : ±0.15 dB |
| Output Power | 1310/1550 nm: -7 dBm ±1.5 dB (CW, G.652.C/D) 1300 nm: -7 dBm ±1.5 dB (CW, 50 µm MMF) 850 nm: 0 dBm ±1.5 dB (CW, 50 µm MMF) |
- Flex Scan
- AC charger
- Battery
- Carry strap
- SC/2.5 mm connector adapters
- TRM 3.0 Advanced Test Results Manager software
- Quick reference user guide
- Carry case
- 150m fiber ring
- One-Click cleaner
- Focis Flex fiber optic connector inspection system
- OFI-BIPM bend-insensitive optical fiber identifier with power meter
Be the first to review “AFL FS300-325-BIPM-P1-W1 – FS300 Quad OTDR BIPM Kit, with OLS/OPM and WiFi/Bluetooth”
Reviews
There are no reviews yet.