HDE DDVIP-138/K03 – Dual Display Wireless Voltage Indicating Phaser 100V-138kV, OH/UG Kit 2
$3,208.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
HDE DDVIP-138/K03 - Dual Display Wireless Voltage Indicating Phaser 100V-138kV, OH/UG Kit 2 Specs
| Conditions | Indoor and outdoor use |
| Altitude | Up to 6,566 ft. (2000M) |
| Operating Temperature | -20°F to +120°F (-29°C to +49°C) |
| Humidity | - 95% to 49°C (non-condensing) |
| Pollution Degree | - PD4 |
| Measurement Category IV | Classification Rating (CAT IV) Product is intended for use with test and measuring circuits connected to the circuits/wiring outside of a building installation, including transmission lines. |
| Enclosure Material | Supertough Nylon UL 94-HB |
| Printed Circuit Boards | FR-4 UL94V-0 |
| IEC Protection Rating | IP64 |
| Length | 14 in. (36cm), Width 4.6 in. (12cm) |
| Height | 4.1 in. (10cm) |
| Weight | (w/o probes): 1.6 lbs. (0.7kg) each unit |
| Battery Life | 8 hours continuous use under normal operating conditions |
| Battery | 9V alkaline 1604A, IEC 6LR61 or 9V lithium, ANSI-1604LC |
| Digital Meter | Reads in kilovolts |
| Voltage Range | 100V-80kV each unit line-to-ground and 100V-138kV line-to-line |
| Frequency | 50/60Hz |
| Auto-Ranging | No range selector switch |
| Accuracy | Within 15% of reading, dependent upon geometry |
| Meter Resolution | 0.10 - 0.90 range with 10 Volt resolution 1.0 - 9.9 range with 100 Volt resolutio 10 - 80 range with 1,000 Volt resolution |
- DDVIP-138
- 025-OLPS-5 Overhead Brass Hook Probes (2)
- ASP-15-25 (2)
- ASP-35U 35kV UG Bushing Probe (2)
- PT-DDVIP Proof Tester
- CS-DDVM Case
Be the first to review “HDE DDVIP-138/K03 – Dual Display Wireless Voltage Indicating Phaser 100V-138kV, OH/UG Kit 2”
Reviews
There are no reviews yet.