Rohde and Schwarz NRP18SN – Three-Path Diode Power Sensor (10 MHz – 18 GHz), LAN Model

$6,731.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
SKU: Rohde-&-Schwarz-NRP18SN
Category:
Brand:

Rohde and Schwarz NRP18SN - Three-Path Diode Power Sensor (10 MHz - 18 GHz), LAN Model Specs

Frequency rangeR&S NRP18S(N)
Impedance matching (SWR)10 MHz to 2.4 GHz
> 2.4 GHz to 8.0 GHz< 1.20 (1.18)
> 8.0 GHz to 18.0 GHz< 1.25 (1.23)
Power measurement rangecontinuous average
burst average300 nW to 200 mW (-35 dBm to +23 dBm)
timeslot/gate average300 pW to 200 mW (-65 dBm to +23 dBm)1
trace2 nW to 200 mW (-57 dBm to +23 dBm)2
Maximum poweraverage power
peak envelope power2 W (+33 dBm) for max. 10 µs
Measurement subrangespath 1
path 2-53 dBm to +5 dBm
path 3-33 dBm to +23 dBm
Transition regionswith automatic path selection 3
Dynamic responsevideo bandwidth
rise time 10 %/90 %< 5 µs (3 µs)
Acquisitionsample rate (continuous)
accuracy of time base±5 ppm
Triggeringinternal
threshold level range-38 dBm to +23 dBm
threshold level accuracyidentical to uncertainty for absolute power measurements
threshold level hysteresis0 dB to 10 dB
dropout 40 s to 10 s
externalEXTernal[1]: R&S NRX/NRP2 or R&S NRP-Z5
slope (external, internal)pos./neg.
delay-5 s to +10 s
hold-off0 s to 10 s
resolution (delay, hold-off, dropout)0.5 µs (sample period)
sourceINTernal, EXTernal[1], EXTernal2,   IMMediate, BUS, HOLD
Zero offsetinitial, without zeroing
path 1< 250 [235] (50) pW
path 2< 10.5 [10.3] (2.2) nW
path 3< 1.10 [0.93] (0.19) µW
path 1< 53 [49] (28) pW
path 2< 2.2 [2.1] (1.3) nW
path 3< 224 [192] (108) nW
Zero drift 6path 1
path 2< 0.6 [0.5] (0.1) nW
path 3< 54 [47] (8) nW
Measurement noise 7path 1
path 2< 1.6 [1.5] (0.9) nW
path 3< 158 [136] (76) nW
     
  • Power sensor
Note: connection cables and peripherals sold separately
 

Reviews

There are no reviews yet.

Be the first to review “Rohde and Schwarz NRP18SN – Three-Path Diode Power Sensor (10 MHz – 18 GHz), LAN Model”

Your email address will not be published. Required fields are marked *