Fluke 718 1G Pressure Calibrator 1 PSIG
$2,405.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Fluke 718 1G Pressure Calibrator 1 PSIG Specs
| 718 Series Measure Pressure | (internal sensor) |
| Accuracy: | 0.05% full scale |
| Functions: | zero, min/max, hold, damp |
| Note: | Dry air, non-corrosives only |
| 718 1G Range: | -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa) |
| Resolution: | 0.0001 psi, 0.001 mbar, 0.0001 kPa |
| Over Pressure: | 5x Full Scale |
| Functions: | Zero, Min, Max, Hold, Damp |
| 718 30G Range: | -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa) |
| Resolution: | 0.001 psi, 0.1 mbar, 0.01 kPa |
| Over Pressure: | 5x Full Scale |
| Functions: | Zero, Min, Max, Hold, Damp |
| 718 100G Range: | -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa) |
| Resolution: | 2x Full Scale |
| Functions: | Zero, Min, Max, Hold, Damp |
| 718 300G Range: | -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa ) |
| Resolution: | 0.01 psi, 1 mbar, 0.1 kPa |
| Over Pressure: | 375 PSI 25 bar |
| Functions: | Zero, Min, Max, Hold, Damp |
| Range: | 29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs |
| Resolution: | Per pressure module specs |
| Accuracy: | To 0.025 % of full span, per pressure module specs |
| Functions: | Zero, Min, Max, Hold, Damp Note: media compatibility per pressure module specs |
| Range: | -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm |
| Loop Power: | Range: 24 V dc Accuracy: +/- 10 % Note: Drive; 20 mA into 1000 O for battery > 6.8V; 700 O for battery 5.8 to 6.8 V |
| mA Measure: | Range: 0 mA to 24 mA Resolution: 0.001 mA Accuracy: 0.015 % + 1 count |
| Maximum voltage | 30 volts: Non-operating |
| Temperature | -40 °C to 60 °C |
| Operating Temperature | -10 °C to 55° C |
| Relative Humidity | 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C) |
| Operating Altitude | 3,000 M max |
| Shock | 1 M drop test |
| Vibration | Random, 2 g, 5 Hz – 500 Hz |
| Safety | CSA C22.2 No. 1010.1: 1992 |
| EMC | EN50082-1: 1992 and EN55022: 1994 Class B |
| Size | 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in) |
| Weight | 992 g (35 oz) |
| Power, battery life | 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 |
| Battery Life | 4 to 20 hours typical, depending on functions used |
| Warranty | Three years (one year on pressure pump in Fluke 718) |
| Display | LCD, 5 digit pressure and current simultaneous |
| Note | For use with non-corrosive gasses |
- Protective Yellow Holster with test lead storage
- Instructions Sheet (14 languages)
- Test Leads and Alligator Clip
- Two 9V alkaline batteries
- NIST - Traceable calibration report and data
Be the first to review “Fluke 718 1G Pressure Calibrator 1 PSIG”
Reviews
There are no reviews yet.