CPS LS1 – Leak Seeker 1 Refrigerant Leak Detector
$219.00
In Stock
In Stock
CPS LS1 - Leak Seeker 1 Refrigerant Leak Detector Specs
| Sensor | State of the art E_MOS® technology |
| Gases | Sensitive to CFC, HCFC, HFC and HFO refrigerants. Sensitive to Hydrogen trace gas in 95% N2, 5% H2 mixture. Sensitive to NH3 and HC refrigerants. CAUTION: This leak detector is not intrinsically safe. Use in well ventilated areas. |
| Sensitivity | Better than a 0.1 oz / year (3 g / annually) for all common refrigerants, including R-410a, R-404a and R-407a |
| Leak Indicators | Extended tone range audible alarm indicates the relative size of the leak in the Progressive Alarm mode. Single high pitch tone audible alarm in the Threshold Alarm mode signals the presence of a leak. Audible alarm can be turned ON or OFF by double-clicking the START button. Eight LED bar graph indication signaling the relative size of the leak in the Progressive Alarm mode. Solid 8 LED bar turns on in the Threshold Alarm mode when a leak is present |
| Operating Temperature | -18 to 60˚C (0 to 140˚F) |
| Power | Three size "C" alkaline batteries (NEDA/ANSI 14A) |
| Battery Life | 50 hours minimum at 77˚F (25˚C). Battery life depends on cell chemistry and ambient conditions. Alkaline batteries provide longest life. Cold ambient conditions decrease battery life. The Leak-Seeker ® I turns itself off after 10 minutes of inactivity - START button not pressed - to further prolong battery life |
| Dimensions | Instrument (L x W x H): 10" x 2.3" x 2" 254mm x 59mm x 51mm |
| Probe | 15" (380mm) long, .25" (6.4mm) diameter |
| Weight | 1 lb 2 oz (500 g) |
| Certifications | Complies with European Standard EN14624:2012 |











Reviews
There are no reviews yet.