PIE 235 Process Voltage Calibrator
$753.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
PIE 235 Process Voltage Calibrator Specs
| Operating Temperature Range | -20 to 60 °C (-5 to 140 °F) |
| Storage Temperature Range | -30 to 60 °C (-22 to 140 °F) |
| Temperature effect | ≤ ± 0.005 %/°C of Full Scale |
| Relative Humidity Range | 10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing |
| Common Mode Rejection | 50/60 Hz, 100 dB |
| Normal Mode Rejection | 50/60 Hz, 50 dB |
| Noise | ≤ ± ½ Least Significant Digit from 0.1 to 10 Hz |
| Size | 5.63 x 3.00 x 1.60 in, 143 x 76 x 41mm (L x W x H) |
| Weight | 12.1 ounces, 0.34 kg (including boot & batteries) |
| Batteries | Four “AA” Alkaline 1.5V (LR6) |
| Battery Life | ≥ 50 hours |
| Low Battery | Low battery indication with nominal 1 hour of operation left |
| Protection against misconnection | Over-voltage protection to 60 vrms (rated for 30 seconds). Red LED and audible alarm indicates OVERLOAD for out of range conditions. |
| Display | High contrast graphic liquid crystal display with 0.35” (9 mm) high digits on main & 0.2” (5 mm) on mA display. LED backlighting for use in low lit areas. |
| Ranges and Resolution | Accuracy |
| -500.00 to 999.00 mV | ≤ ± (0.02 % of Reading + 0.01% of Full Scale) |
| 1.000 to 5.000 V | ≤ ± (0.02 % of Reading + 0.002 V) |
| 0.000 to 20.000 V | ≤ ± (0.02 % of Reading + 0.01% of Full Scale) |
| -25.0 to 125.0% of 1 to 5 V | ≤ ± 0.1% |
| Source Current | ≥ 20 mA |
| Sink Current | > 16 mA |
| Output Impedance | ≤ 0.3 Ohm at ≤ 20 mA load |
| Short Circuit Duration | Infinite |
| Range and Resolution | Accuracy |
| -500.00 to 999.00 mV | ≤ ± (0.02 % of Reading + 0.01% of Full Scale) |
| 1.000 to 5.000 V | ≤ ± (0.02 % of Reading + 0.002 V) |
| 0.000 to 20.000 V | ≤ ± (0.02 % of Reading + 0.01% of Full Scale) |
| -25.0 to 125.0% of 1 to 5 V | ≤ ± 0.1% |
| 0.00 to 60.00 V | ≤ ± (0.02 % of Reading + 0.02 V) |
| Input resistance | ≥ 1 MΩ |
| Accuracy in mV | ≤ ± (0.02 % of Reading in mV + 0.1 mV) |
| Accuracy in pH | ≤ ± 0.003 pH @ 25°C |
- Four "AA" Alkaline batteries
- NIST Traceable Calibration Card
- Black Rubber Boot
- Evolution Hands Free Carrying Case
- Evolution mA/V Test Leads (1 Red & 1 Black Lead with Banana Plugs & Alligator Clips)
Be the first to review “PIE 235 Process Voltage Calibrator”
Related products
Reviews
There are no reviews yet.