Autonics MT4Y-DA-44 – Digital Panel Meter, DC current, Relay (Low out), RS485 Comm, 100-240 VAC
$155.00
In Stock
In Stock
Autonics MT4Y-DA-44 - Digital Panel Meter, DC current, Relay (Low out), RS485 Comm, 100-240 VAC Specs
| Model | MT4W-XX-4X |
| Power Supply | 100-240VAC 50/60Hz |
| Allowable voltage range | 90 to 110% |
| Power consumption | 5VA |
| Display method | 7 Segment LED display (red) (Character height: 14.2mm) |
| Display accuracy | 23 °C ±5 °C - DC Type: F.S.±0.1% rdg±2digit / AC Type: F.S.±0.3% rdg±3digit DC/AC Type: F.S.+0.3% rdg +3digit max. only for 5A terminal -10 °C to 50 °C - DC/AC Type: F.S.±0.5% rdg±3digit |
| Input | DC Voltage/Current, AC Voltage/Current, AC Frequency |
| Max. allowable input | 110% for each measured input range |
| A/D conversion method | Practical over sampling using successive approximation ADC. |
| Sampling cycle | DC type: 50ms, AC type: 16.6ms |
| Max. indication range | -1999 to 9999 (4digit) |
| Preset output | • Relay output - Contact capacity: 250VAC 3A, 30VDC 3A/Contact composition: N.O (1a) • NPN/PNP Open Collector output - 12-24VDC ±2V 50mA Max. (Load resistance) |
| Sub output (Transmission output) | • RS485 communication output - Baud rate:1200/2400/4800/9600, Communication method : 2-wire half duplex,Synchronous method: Asynchronous method , Protocol : Modbus type • Serial/BCD output - NPN Open collector output, 12-24VDC Max. 50mA (Resistive load) • DC4-20mA output - Resolution: 12,000 division (Load resistance max. 600Ω), Response time:Max. 450ms |
| Insulation resistance | Min. 100MΩ (at 500VDC megger) between external terminal and case |
| Dielectric strength | 2,000VAC for 1minute between external terminal and case |
| Noise strength | ±2kV the square wave noise (pulse width: 1 ㎲ ) by the noise simulator |
| Vibration | Mechanical |
| Malfunction | 0.5mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 10 min. |
| Shock | Mechanical |
| Malfunction | 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times |
| Relay Life Cycle | Mechanical |
| Malfunction | Min. 100,000 operations (250VAC 3A Load current) |
| Environment | Ambient Temperature |
| Ambient Humidity | 35 to 85%RH, Storage: 35 to 85%RH |
| Insulation type | Double insulation or reinforced insulation |
| Weight | Approx. 326g (approx. 211g) |







Reviews
There are no reviews yet.