Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 LAN Kit
$227.00
In Stock
Structured category data cable validation reaches absolute stability when using the Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 LAN kit. This complete diagnostic assembly pairs a high-performance digital tone generator module with an advanced inductive locator wand to trace active network paths fluidly. Drawing low-power battery drive, it isolates open circuit paths, pinpoints split pairs, and checks structural wire map layout pins.
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 LAN Kit Specs
| Brand | Tempo |
| Operating temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature | -4 °F to +140 °F (-20 °C to +60 °C) |
| Operating relative humidity (% RH without condensation) | 95% (50 °F to 95 °F; 10 °C to 35 °C) 75% (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C) |
| Vibration | Random, 2 g, 5 Hz – 500 Hz |
| Shock | 1 m drop test with and without module |
| Safety | IEC 61010 Category: None |
| Altitude | 3000 m |
| EMC | EN 61326-1 |
| Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications | Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. |
| Dimensions | 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
| Display | LED |
| Control | Thumbwheel switch |
| Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs (2) - two conductor wiring |
| Toner frequency | IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs |
| Output power | 5 V p-p |
| Auto power down | Turns off automatically after 2.5 hours of inactivity |
| Dimensions | 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
| Display | (8) LED indicators, Synch LED indicator |
| Audio | IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal |
| Control | Thumbwheel switch, volume control wheel |
| Tone detection | Detects IntelliTone™ digital signal for Locate, Isolate and CableMap Detects Analog SmartTone Signal (500-1200Hz) and other analog toners. |
| Toner interface | Main Mod8 port for cablemap on all four pairs of UTP / STP cabling |
| Auto power down | Turns off automatically after one hour of inactivity |
- IntelliTone Pro 200 LAN Toner
- 200 Probe
- coax F connector adapter
- two RJ11 and two RJ45 patch cables
- test leads with alligator clips
- lanyards
- quick start guide
- two 9 volt batteries
Be the first to review “Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 LAN Kit”
Reviews
There are no reviews yet.