Commtest Spotcheck Vibration Meter

The Commtest Spotcheck Vibration Meter provides a cost-effective introduction to vibration-based condition monitoring. It has a simple four-button user interface, a compact yet rugged IP64 certified case, and a long-life (>48 hour) rechargeable battery pack. Its automated ISO alarm features require no specialist user training or external software.

By comparing vibration velocity levels against international ISO standards, the Spotcheck device can automatically display simple, easy to understand machinery health alarms that quickly indicate the fitness of machinery to operate.

When measuring bearing vibrations, the device can be configured to display alarms that may indicate existing or approaching bearing failures or seizures. These alarms are generated by analyzing velocity or acceleration measurements at the higher frequencies typically associated with bearing defects (above 1 kHz).

In addition to its vibration measurement capabilities, the Spotcheck device includes an integrated non-contact IR thermal sensor and laser pointer. This sensor enables temperature measurements to be taken safely and accurately from distances of up to 2 meters (6.5 feet) away, locating potential mechanical problems before expensive failures occur.

The Commtest Spotcheck Vibration Meter Includes:

• Spotcheck portable device
• 3.6 V, 1700 mA rechargeable lithium battery pack
• 100 mV/g accelerometer sensor with integrated 80 cm cable (BNC connector)
• Magnetic accelerometer base
• Accelerometer stinger probe attachment
• Mains battery charger (AC 100-240 V, 50/60 Hz input; 4.2 V DC 600 mA output)
• In-car battery charger (DC 12-24 V input; 4.2 V DC 600 mA output)
• Instrument Reference Guide
• Hard carry case