Awaiting product image

Associated Research 08204 – OMNIA II Multi-Function Safety Compliance Analyzer

$8,059.00
In Stock
In Stock
Add to wishlist
Commercial Pricing
Request for Quotations for Bulk Orders
SKU: Associated-Research-8204
Category:
Brand:

Associated Research 08204 - OMNIA II Multi-Function Safety Compliance Analyzer Specs

PLC Remote ControlInput: Test, Reset, Interlock, Recall File 1 through 3 Output: Pass, Fail, Test-in-Process
SafetyBuilt-in SmartGFI circuit
Memory10,000 Steps
InterfaceStandard: USB/RS-232   Optional: Ethernet or GPIB
SecurityAdvanced security system with access levels and username/password requirements
Dimensions (W x H x D)16.93" x 5.24" x 19.69" (430 x 133 x 500 mm)
Voltage115/230 V Auto Range, ± 15 % Variation
Frequency50/60 Hz ± 5%
Fuse115 VAC, 230 VAC – 10 A Slow Blow 250 VAC
Output Rating5 kV @ 50 mAAC   5 kV @ 100 mAAC (Models 825X)   6 kV @ 20 mADC
Voltage SettingResolution:   Accuracy:
HI and LO-LimitAC Total
Range:   Resolution:10.00 – 50.00 mA (100.00 mA, models 825X)   0.01 mA
Range:   Resolution:± (2% of setting + 2 counts)
AC RealRange:   Resolution:
Range:   Resolution:10.00 – 50.00 mA (100.00 mA, models 825X)   0.01 mA
Accuracy± (3% of setting + 50 μA)
DCRange:   Resolution:
Range:   Resolution:1,000 – 20,000 μA   1 μA
Accuracy± (2% of setting + 2 counts
Arc DetectionRange:
Ground ContinuityCurrent: DC 0.1 A ± 0.01 A, fi xed   Max. Ground Resistance: 1 Ω ± 0.1 Ω, fi xed
Ground Fault InterruptGFI Trip Current: 0.4 mA – 5.0 mA (AC or DC)   HV Shut Down Speed: < 1 ms
DC Output Ripple≤ 4% Ripple rms at 5 kVDC at 20 mA Resistive Load
Discharge Time≤ 50 ms No Load, < 100 ms for Capacitive Load
Max Capacitive Load, DC Mode1 μF < 1 kV   0.75 μF < 2 kV   0.5 μF < 3 kV
AC Output WaveformSine Wave, Crest Factor = 1.3 – 1.5
Output FrequencyRange:
Output Regulation± (1% of output + 5 V) from no load to full load and over input voltage range
Dwell TimerRange:   Range:
Ramp TimerRamp-up:   Ramp-Down:
Voltage SettingRange:
HI and LO-LimitRange:   Resolution:
Range:   Resolution:100.0 MΩ – 999.9 MΩ   0.1 MΩ
Range:   Resolution:1,000 MΩ – 50,000 MΩ   1 MΩ (HI-Limit: 0=OFF)
Ramp TimerRamp-up:   Ramp-Down:
Delay TimerRange:
Output Voltage (Open Circuit Limit)Range:
Output FrequencyRange:
Output CurrentRange:   Resolution:   Accuracy:
Maximum Loading1.00 – 10.00 A, 0 – 600 mΩ   10.01 – 30.00 A, 0 – 200 mΩ   30.01 – 40.00 A, 0 – 150 mΩ
HI and LO-LimitRange:         Resolution:   Accuracy:
Range:   Resolution:   Accuracy:0 – 600 mΩ for 1.00 – 5.99 A   1 mΩ   ± (3% of reading + 3 mΩ)
Dwell TimerRange:
Milliohm OffsetRange:
Output CurrentDC 0.01 A ± 0.00001 A
Resistance DisplayRange:
HI and LO-LimitRange:   Resolution:
Range 2:   Resolution:10.1 – 100.0 Ω   0.1 Ω
Range 3:   Resolution:   Accuracy:101 – 1,000 Ω   1 Ω   ± (1% of reading + 3 counts)
Range 4:   Resolution:   Accuracy:1,001 – 10,000 Ω   1 Ω   ± (1% of reading + 10 counts) (Max Limit: 0=OFF)
Dwell TimerRange:
Milliohm OffsetRange:
DUT PowerVoltage:   Current:   Range:   Resolution:   Accuracy
Delay Time SettingRange:
Dwell Time SettingRange:
Trip Point Settings & MeteringVoltage
Volt-Hi   Volt-LORange:   Resolution:   Accuracy:
Amp-HI   Amp-LORange:   Resolution:   Accuracy:
Power-HI   Power-LORange:   Resolution:   Accuracy:
PF-HI   PF-LORange:   Resolution:   Accuracy:
Leak-HI   Leak-LORange:   Resolution:   Accuracy:
Timer DisplayRange:   Resolution:   Accuracy:
Dut PowerVoltage:   Current:
Voltage DisplayRange:   Resolution:   Accuracy:
Short Circuit   Protection:23 AAC, Response Time < 3 s
Reverse Power SwitchReverse polarity switch setting select ON/OFF/AUTO   ON: Reverse power   OFF: Normal   AUTO: Automatic Reverse Polarity
Neutral SwitchON/OFF selection for single fault condition
Ground SwitchON/OFF selection for Class I single fault condition
Probe SettingSurface to Surface (PH – PL)   Surface to Line (PH – L)   Ground to Line (G – L)
Touch Current High Limit (rms)Range: Resolution:
Touch Current Display (rms)Range 1:
Range 2:28.0 μA ~ 130.0 μA, frequency DC, 15 Hz – 1 MHz
Range 3:120.0 μA ~ 550.0 μA, frequency DC, 15 Hz – 1 MHz
Resolution for Ranges 1, 2, 3:0.1 μA
Accuracy for Ranges 1, 2, 3:DC: 15 Hz < f <100 KHz: ± (2% of reading + 3 counts) 100 KHz < f < 1 MHZ: ± 5% of reading (10.0 μA – 999.9 μA)
Range 4:400 μA ~ 2100 μA, frequency DC, 15 Hz – 1 MHz
Range 5:800 μA ~ 8500 μA, frequency DC, 15 Hz – 1 MHz
Resolution for Ranges 4 & 5:1 μA
Accuracy for Ranges 4 & 5:DC: 15 Hz < f <100 KHz: ± (2% of reading + 3 counts) 100 KHz < f < 1 MHZ: ± 5% of reading (10 μA – 8500 μA)
Range 6:8.00 mA ~ 10.00 mA, frequency DC 15 Hz – 100 kHz
Resolution:0.01 mA
AccuracyDC: 15 Hz < f < 100 KHz: ± 5% of reading (0.01 mA -10.00 mA)
Touch Current Display (Peak)Range 1:
Range 2:28.0 μA ~ 130.0 μA, frequency DC – 1 MHz
Range 3:120.0 μA ~ 550.0 μA, frequency DC – 1 MHz
Resolution for Ranges 1, 2, 3:0.1 μA
Accuracy for Ranges 1, 2, 3:DC: ± (2% of reading + 2 μA) 15 Hz < f < 1 MHZ : ± 10% of reading + 2 μA
Range 4:400 μA ~ 2100 μA, frequency DC – 1 MHz
Range 5:1800 A ~ 8500 μA, frequency DC – 1 MHz
Resolution for Ranges 4 & 5:1 μA
Accuracy for Ranges 4 & 5:DC: ± (2% of reading + 2 μA)   15 Hz < f < 1 MHz: ±(10% of reading + 2 μA)
Range 6:8.0 mA ~10.00 mA, frequency DC – 100 KHz
Resolution:0.01 mA
AccuracyDC: ± (2% of reading + 3 counts) 15 Hz < f < 100 KHz: ± (10% of reading + 2 counts)
MD Circuit ModuleMD1: UL544NP, UL484 , UL923, UL471, UL867, UL697   MD2: UL544P   MD3: IEC 60601-1   MD4: UL1563   MD5: IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1,   IEC60598-1, IEC60065, IEC61010   MD6: IEC60990 Fig5 U3, IEC60598-1   MD7: IEC60950, IEC61010-1 FigA.2 (2K ohm) for Run function   MD8: IEC60990/60950 Fig4 U1
External MDBasic measuring element 1 kΩ
Scope Output InterfaceBNC type connector on rear panel for Oscilloscope connection
  • High Voltage Cable
  • High Current Output Cable
  • High Current Return Cable
  • High Current Test Lead
  • Fuse
  • USB Cable AB-Type 1.8m
  • Line Cord
  • Adapter Box
  • (2) Bracket Rack Mount 3U
  • (2) Handle Rack Mount 3U
  • (4) Screw M4 x 12mm FHMS
  • NIST Traceable Calibration Certificate

Reviews

There are no reviews yet.

Be the first to review “Associated Research 08204 – OMNIA II Multi-Function Safety Compliance Analyzer”

Your email address will not be published. Required fields are marked *