Chroma 19073 Hipot Tester (AC/DC/IR) – Sentry 30 Plus
$2,191.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
Chroma 19073 Hipot Tester (AC/DC/IR) - Sentry 30 Plus Specs
| Model | 19071 |
| Mode | ACV |
| Scanner Unit | - |
| Output Voltage | AC : 0.05 ~ 5kV, DC : 0.05 ~ 6kV |
| Load Regulation | 26.4555(1%+5V) |
| Voltage Resolution | 2V |
| Voltage Accuracy | 1% of setting + 5 count |
| Cutoff Current | AC : 0.1~20mA, DC : 0.01 ~ 5mA |
| Current Resolution | AC : 1µA, DC : 0.1µA |
| Current Accuracy | ±(1.5% of reading + 5 counts) |
| Output Frequency | 50Hz / 60Hz |
| Test Time | 0.3 ~ 999 sec., continue |
| Ramp Time | 0.1 ~ 999 sec., off |
| Fall Time | 0.1 ~ 999 sec., off |
| Dwell Time | 0.1 ~ 999 sec., off |
| Waveform | Sine wave |
| Setting Mode | Programmable setting |
| Detection Current | AC : 1mA ~ 20mA, DC : 1mA ~ 5mA |
| Fast Output Cut-off | 0.4ms after NG happen |
| Ground Fault Interrupt | 0.5mA ±0.25mA AC, ON/OFF |
| Panel Operation Lock | Present password |
| Continuity Check | 1~5Ω ± 0.2Ω, ON/OFF |
| Indication, Alarm | GO : Short sound, Green LED ; NG : Long sound, Red LED |
| Data Hold | Least tests data memories |
| Memory Storage | 10 steps or 60 groups for total 60 memory |
| Remote control | Input : Start, Stop, Interlock (at 11 pin terminal block only) ; Output : Under test, Pass, Fail |
| Communication Interface | RS485 (Option) |
| Operation Environment | Temperature : 0°C~40°C ; Humidity : 15% to 95% R.H@=40°C |
| Power Requirements | 100V/120V/220V/240V (AC ±10%), 50/60Hz |
| Power Consumption | 300W |
| Dimension (W x H x D) | 270 x 105 x 350 mm |
| Weight | Approx.12 KG |
| Certification | UL, TUV, CE |
- USA type power cable
- Power adapter
- HV terminal test cable
- Low terminal test cable
- Test cable of grounding continue
- 3.15A fuse
- 1.6A fuse
- Quick start guide
- User's manual cd
Be the first to review “Chroma 19073 Hipot Tester (AC/DC/IR) – Sentry 30 Plus”
Reviews
There are no reviews yet.