Meriam M400-GI0050-02 Handheld Pressure and mA Calibrator/Data Logger Single Pressure Sensor

$2,843.00
In Stock
In Stock
Commercial Pricing
Request for Quotations for Bulk Orders
SKU: Meriam-M400-GI0050-02
Brand:

Meriam M400-GI0050-02 Handheld Pressure and mA Calibrator/Data Logger Single Pressure Sensor Specs

M400M402
Pressure Measurementsingle pressure sensor (specified by customer)
Accuracy:±0.025% of Reading from 10 - 100% FS, ±0.002% of Full Scale under 10% of FS
Temperature Performance:Accuracy includes all affects of temperature from -20º to +50º C (-4º to +122º F)
Resolution:select Accurate digits Right Of Decimal (AROD) or Precision digits Right Of Decimal (PROD)
Engineering Units:32 user selectable pressure units
DN sensors:2x range when pressurized on P1 (HI) side only, 150 PSI when applied simultaneously to P1 (HI) and P2 (LO) sides.
DI sensors:3x range when pressurized on P1 (HI) side only, 3x range or 150 PSI (whichever is less) on P2 (LO) side only 1000 PSI when applied simultaneously to P1 (HI) and P2(LO) sides.
GI, CI, AI sensors:2x range
DN sensors:Non-isolated for clean, dry, non-corrosive gases only (Brass, 316L SS, Silicon gel)
DI sensors:Isolated for fluids compatible with 316L SS and Viton GI, CI, AI sensors: Isolated for fluids compatible with 316L SS
DC Voltage:±50 VDC measure, 0 – 24 VDC source
DC Current:±100 mA DC measure, 0 – 24 mA DC source, 0 – 24 mA sink at 3-50 VDC external power
Accuracy:±(0.015% of Reading +0.002 units)
Temperature Performance:Accuracy includes all affects of temperature from -20º to +50º C (-4º to +122º F)
Resolution (measure mode):0.001 V, 0.001 mA or 0.0001 V, 0.0001 mA (user selectable)
Loop Power250Ω HART resistor included   24 VDC @ 4mA, 18.5 VDC @ 20mA   Four (4) AA alkaline batteries power a transmitter at 20 mA output for 10 hours
Operating:-4 to 122°F (-20 to 50°C)
Storage:-40 to 140°F (-40 to 60°C)
Pressure:1/8” NPT (female)
Electrical:Standard banana jacks on ¾” centers Firmware updates, data retrieval: USB mini-B (female)
Portable service:Four (4) AA alkaline batteries provides 30+ hours of continuous measurement service
Operation with PC:Power over USB using USB type A to mini-B cable (requires high power 500 mA port)
Display:128 x 128 pixel (2” x 2” viewable) monochrome display with backlight
Keypad:Sealed membrane keypad with molded dome switches and integrated Adaptive Interface Wheel
Enclosure:8.5” L x 3.75” W (max.) x 2.25” D (max.), polycarbonate case, Softflex® over-molded bumpers, IP40
Weight:M400 single sensor: 1.5 – 1.8 lbs
Firmware Features:Sensor Zero, Sensor Damping, Averaging (pending), Minimum/Maximum capture, Tare (pending), Units Select, Data Logging, Data Logging Record Indicator, Selectable Off Timer, Selectable Backlight Timer, Adjustable Contrast, Adjustable Backlight Brightness, Battery Monitor
Field Recalibration:All sensors can be recalibration in the field using suitable reference standards. M4 Series products may also be returned to Meriam for factory recertification / recalibration service.
     
  • Soft carrying case
  •  
  • Lead set
  •  
  • Batteries
  •  
  • SD card
  •  
  • Manual

Reviews

There are no reviews yet.

Be the first to review “Meriam M400-GI0050-02 Handheld Pressure and mA Calibrator/Data Logger Single Pressure Sensor”

Your email address will not be published. Required fields are marked *