Vitrek 952i - 6KV AC/DC/IR/GB/LR Electrical Safety Compliance Analyzer

Vitrek 952i – 6KV AC/DC/IR/GB/LR Electrical Safety Compliance Analyzer

Name: Vitrek 952i - 6KV AC/DC/IR/GB/LR Electrical Safety Compliance Analyzer
Brand: Vitrek
SKU: Vitrek-952i
Price: 4580.00 USD
Availability: InStock

$4,580.00

In Stock

Add to wishlist

Commercial Pricing

Request for Quotations for Bulk Orders

SKU: Vitrek-952i

Category: Hipot Testers

Brand: Vitrek

Specification
Reviews (0)

Vitrek 952i - 6KV AC/DC/IR/GB/LR Electrical Safety Compliance Analyzer Specs

DC Output Voltage	30V to 6500V (951i & 952i) 50V to 11000V (953i,954i & 955i)
Resolution	0.1V up to 999.9V, 1V above
Accuracy	0.25% + 0.5V ( 1 year 23°C ± 3°)
DC Current Sourcing	50mA max, 25mA above 6000V (951i & 952i) 30mA max, 20mA above 6000V, 10mA above 7500V, 5mA above 9000V (953i, 954i, 955i)
Ramp Time	0.01 to 9999sec, 0.01sec resolution or 0.1 to 50000V/sec, 0.1V/sec resolution
Dwell Time	0.02 to 9999 seconds or user terminated, 0.01sec resolution
Discharge	25mA max in solid-state constant current discharge mode, selectable same as ramp rate or ramp to next level if next step is DCW, DCez or DCIR
DC Leakage Current	Measurement Range: 0 to +/-200mA,
Resolution	4 digits (9999 counts) down to 100pico-amp
Accuracy	0.25% + 0.5nA + ½ digit ( 1 year 23°C ± 3°)
Min & Max Current limits	Selectable for Ramp and Dwell 100 pico-amps and up
Measurement Period	1 power line cycle (50/60Hz)
Insulation Resistance (IR)	Test modes include: End on pass reading, end on fail or end on dwell timer
Test Voltage	5% Accuracy* Max resistance
500V	50GΩ
1000V	100GΩ
2500V	250GΩ
5000V	500GΩ
10000V	1TΩ
AC Output Voltage	20V to 6000V RMS (951i, 952i, 953i, 954i) 50V to 10,000V RMS (955i) 100V to 30,000V RMS (option AC-30)
Resolution	0.1V up to 999.9V, 1V above
Accuracy	0.5% + 1.5V (+ 0.01% per Hz above 100Hz)
AC Current Sourcing	50mA RMS max (951i, 952i, 953i, 954i) 30mA RMS max , (955i) 200mA RMS with option AC-2 (2KVAC RMS max output) 10mA RMS Max with AC-30 option
Output Frequency	Digitally synthesized, low distortion sinewave 20Hz to 500Hz, standard or AC-2) 40Hz to 500Hz, (955i) 0.1% accuracy, 0.1Hz resolution (1Hz above 99.9Hz)
Ramp Time	0 to 9999sec, 0.01sec resolution or 0.1 to 100000V/sec, 0.1V/sec resolution
Dwell Time	0.02 to 9999 seconds or user terminated, 0.01sec resolution
Accuracy	0.05% + 20mS
Ramp Down	Selectable same as ramp time or ramp to next level if next test step is an ACV test type
AC Leakage Current	Measurement Range: 0 to +/-200mA RMS
Resolution	4 digits (9999 counts) down to 100pico-amps
Accuracy	0.5% + 10nA (add 0.005% per Hz above 100Hz) Selectable min & max limits for Ramp & Dwell, from 100 pico amps up Measurement Period: 1 power line cycle (50/60Hz)
Phase Measurement	Total RMS current, In-phase current, Quadrature current (reactive/out-of-phase)
Accuracy	0.01° per Hz, relative to output voltage
AC Insulation Resistance	Test modes include: End on pass reading, end on fail or end on dwell timer
Test Voltage (50/60Hz)	10% Accuracy* Max resistance
500V	5GΩ
1000V	10GΩ
2500V	25GΩ
5000V	50GΩ
10000V (955i only)	100GΩ
Test Current	0.1 to 40A RMS, 0.001A resolution
Accuracy	0.5% + 5mA accuracy (add 0.005% per Hz above 100Hz)
Test Frequency	40Hz to 500Hz
Resolution	0.1Hz (1Hz above 99.9Hz) Accuracy: 0.1% accuracy
Waveform	Digitally synthesized, low distortion sinewave
Measurement Configuration	4-Terminal Kelvin
Compliance Voltage	6.5V RMS, may be user limited to a lower level with 0.01V resolution
Resistance Range	6.5 ohms at 1A decreasing to 162.5 milli-ohms max at 40A
Max load impedance	10 ohms
Ramp Time	0 to 9999sec, 0.01sec resolution
Accuracy	(1% + 0.1sec) accuracy
Dwell Time	0.02 to 9999sec or user terminated, 0.01sec resolution
Accuracy	0.05% + 20ms
Ramp Down	Fast (35mS), same rate as ramp up or may be skipped if next test step is a ground bond test
Voltage Sense	Range: 0 to 8 v rms
Resolution	4 digits down to 10uV Accuracy: 0.5% + 30uV
Phase Measurement	RMS, In-phase and Quadrature measurements 0.01° per Hz phase relative to test current
Measurement Range	0 to 150Kohm (999.9mΩ to 99.99KΩ, 149.9KΩ in 7 ranges)
Resolution	4 digits, 100µΩ on 1ohm range
Test Current	55mAdc constant current up to ≈ 91Ω, 5VDC constant V above
Accuracy (4-wire)	0.5% + 0.002ohm + ½ digit up to 30K ohm 1.5% + ½ digit above 30K ohm 5% + 1 digit from 100K to 150K ohm Add 20mΩ for 2 -wire
Voltage Measurement	0 to ± 8KVDC 6KV RMS AC (951i & 952i) 0 to ± 11KVDC 8KV RMS AC (953i & 954i) 0 to ± 11KVDC 10KV RMS AC ( 955i)
Resolution	0.1V, 1 V above 999.9V
DC Accuracy	0.25% + 0.5V
AC Accuracy	0.5% + 1.5V
Leakage Current	0 to ± 200mA DC or RMS AC
Resolution	4 digits (9999 counts) down to100pico-amps
DC Accuracy	0.25% + 0.5nA
AC Accuracy	0.5% + 20nA
Test Results Test Time	0.02 to 9999 sec Last, Minimum, Average & Max V& A reading plus arc current
Test Waveform	Trapezoidal (Selectable positive polarity, negative polarity or bi-polar)
Ramp Up/Down Time	1ms (0.5ms for option AC2) to 30mS with 0.1ms resolution
Dwell Time	1ms (0.5ms for option AC2) to 30mS with 0.1ms resolution
Test Voltage	50V to 8000V (20V to 2750V with option AC-2)
Resolution	0.1V up to 999.9V, 1V above
Accuracy	0.25% + 1.5V
Test Lead Safety Sense	TLSS™ Technology continuously verifies that test leads are properly connected prior to and during HV, 4-wire Low Ohms and Ground Bond testing
Arc Detection Sensitivity	User selectable 3 microseconds to 30 microseconds.
Dwell Time Accuracy	Accuracy: 0.05% + 20mS
RS232 Interface	Digital I/O, VICL: Vitrek auxiliary unit control loop Remote Interface Option "IF-3": GPIB - IEEE-488.2 Subset compatible RS232C - 1200, 2400, 4800, 9600 Baud rate selectable Parallel - IBM/Centronics compatible
Accuracy	Stated specifications are bipolar and apply for one year within 5°C from calibration temperature (20 to 25°C).
Operating Temperature	0 C to 50° C
Humidity	90% RH, 0 to 40° C
Power	115/230 VAC + 10%, 350 VA Max
Dimensions	89mm H x 432mm W x 457mm D (3.5" H x 17" W x 18" D)
Weight	9Kg (18 lb.) Net / 18Kg (25 lb.) shipping (951i, 953i, 959i) 14Kg (28 lb.) Net / 18Kg (35 lb.) shipping (952, 954i, 955i)